With the popularization and application of microcomputer technology, the development of balancing machines has entered a new era, and dynamic balancing machines have significantly improved in performance, accuracy, and operability. Dynamic balancing machines have been widely used in electric tools, mechanical manufacturing, fans, motors, papermaking, textiles, household appliances, metallurgy and other fields. But how to do a good job in the daily cleaning of the balancing machine? It is inevitable that dust will fall during use, which not only looks unattractive but also affects the performance of the machinery; The technical master of Shenman Dynamic Balance Machine Factory popularizes the tips for cleaning dynamic balance machines for everyone.
Always keep the balance machine clean, and the guide rail surface should be kept clean, and oil should be applied regularly to prevent rust. The surface of the support block or roller should be kept clean, and iron shavings, dust, and debris should not be adhered. Before each operation, the support block or roller and rotor journal should be wiped clean, and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed to avoid scratches and wear on the surface of the shaft neck and rollers. It is not allowed to place the rotor on the roller frame for tapping or impact.
1. Keep the surface of the supporting and connecting parts clean, carefully inspect and add oil before work, and maintain good lubrication during work.
2. The various parts of the rack have been adjusted before leaving the factory, and should not be disassembled randomly during use.
3. Before each use, add an appropriate amount of No. 30 engine oil to the lubrication area. Each butter should be cleaned and replaced once a year under a one shift system.
4. The locking mechanism should be able to reliably lock the swing frame. When released, it should completely leave the swinging part. The swing frame should only be released during measurement, and should be locked at all other times. When locked, the wheel frame should not move.
5. It is not advisable to place the balanced parts on the shelf for a long time during non working hours.
6. The electrical box should be kept clean to prevent moisture.
When abnormalities are found during the use of the balancing machine that cannot be handled, the power should be cut off in a timely manner and the manufacturer's after-sales service should be notified.
The lens glass of the photoelectric head of the dynamic balancing machine should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Do not use oily gauze or dirty cloth to wipe the mirror surface. A balancing machine is a precision testing equipment that should be managed and operated by a dedicated person.
An unbalanced rotor generates pressure on its supporting structure and the rotor itself during its rotation, leading to vibration; Therefore, dynamic balance of the rotor is very necessary. Shenman Dynamic Balancing Machine Factory specializes in self driving balancing machines, automatic positioning balancing machines, vertical balancing machines, on-site balancing instruments, balancing machines, belt balancing machines, dynamic balancing machines, fully automatic balancing machines, transmission shaft balancing machines, universal joint balancing machines, and other products. It is one of the earliest private enterprises in China to have the ability to produce 40 ton heavy-duty dynamic balancing machines, and is currently one of the enterprises that breaks the production record of 70 ton heavy-duty dynamic balancing machines for private dynamic balancing machine enterprises.
When purchasing a balancing machine, Shenman provides technical personnel to come to the site for free debugging and training of balancing machine operators; The warranty period for the product is one year. During this period, if maintenance is required, technical personnel will arrive on time within 24 hours in the city and 72 hours outside the city. We also provide renovation and lifelong maintenance services for various balancing machines. If certain components (such as the electrical measurement part) are no longer repairable, or have a high failure rate after years of use, or the original functions no longer meet your usage requirements, and you want to update and add new functions to the new products, you need to carry out a renovation project on the balancing machine. The electrical measurement system can be modified according to the user's choice.
Always keep the balance machine clean, and the guide rail surface should be kept clean, and oil should be applied regularly to prevent rust. The surface of the support block or roller should be kept clean, and iron shavings, dust, and debris should not be adhered. Before each operation, the support block or roller and rotor journal should be wiped clean, and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed to avoid scratches and wear on the surface of the shaft neck and rollers. It is not allowed to place the rotor on the roller frame for tapping or impact.
1. Keep the surface of the supporting and connecting parts clean, carefully inspect and add oil before work, and maintain good lubrication during work.
2. The various parts of the rack have been adjusted before leaving the factory, and should not be disassembled randomly during use.
3. Before each use, add an appropriate amount of No. 30 engine oil to the lubrication area. Each butter should be cleaned and replaced once a year under a one shift system.
4. The locking mechanism should be able to reliably lock the swing frame. When released, it should completely leave the swinging part. The swing frame should only be released during measurement, and should be locked at all other times. When locked, the wheel frame should not move.
5. It is not advisable to place the balanced parts on the shelf for a long time during non working hours.
6. The electrical box should be kept clean to prevent moisture.
When abnormalities are found during the use of the balancing machine that cannot be handled, the power should be cut off in a timely manner and the manufacturer's after-sales service should be notified.
The lens glass of the photoelectric head of the dynamic balancing machine should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Do not use oily gauze or dirty cloth to wipe the mirror surface. A balancing machine is a precision testing equipment that should be managed and operated by a dedicated person.
An unbalanced rotor generates pressure on its supporting structure and the rotor itself during its rotation, leading to vibration; Therefore, dynamic balance of the rotor is very necessary. Shenman Dynamic Balancing Machine Factory specializes in self driving balancing machines, automatic positioning balancing machines, vertical balancing machines, on-site balancing instruments, balancing machines, belt balancing machines, dynamic balancing machines, fully automatic balancing machines, transmission shaft balancing machines, universal joint balancing machines, and other products. It is one of the earliest private enterprises in China to have the ability to produce 40 ton heavy-duty dynamic balancing machines, and is currently one of the enterprises that breaks the production record of 70 ton heavy-duty dynamic balancing machines for private dynamic balancing machine enterprises.
When purchasing a balancing machine, Shenman provides technical personnel to come to the site for free debugging and training of balancing machine operators; The warranty period for the product is one year. During this period, if maintenance is required, technical personnel will arrive on time within 24 hours in the city and 72 hours outside the city. We also provide renovation and lifelong maintenance services for various balancing machines. If certain components (such as the electrical measurement part) are no longer repairable, or have a high failure rate after years of use, or the original functions no longer meet your usage requirements, and you want to update and add new functions to the new products, you need to carry out a renovation project on the balancing machine. The electrical measurement system can be modified according to the user's choice.
39 Views
