With the application of micro-computer technology, the automatic balancing machine has entered a new era. The performance, accuracy and operability of the automatic balancing machine have been significantly improved. It is also widely used in electric tools, machinery manufacturing, fan, motor, paper, textile, household electrical appliances, metallurgy and other fields. Like other mechanical products, the dynamic balancer will speed up loss and shorten service life if it can not be maintained well. Therefore, in order to save more costs, we must pay attention to the maintenance of the dynamic balancer.
The automatic balancing machine is an instrument used to measure rotor imbalance, which is corrected according to the measured results so as to improve the mass distribution of the balanced rotor and reduce the vibration of the journal or the force acting on the bearing when the rotor is running to the specified range. For the daily maintenance of the car, the role of the balancer can not be ignored. How much do you know about the balancer?
1. It is necessary to wipe the balancing machine frequently and insist on cleaning the balancing machine. The guide rail surface should be cleaned consistently and always be oiled and rust-proof.
2. The exterior of the supporting blocks or rollers shall be cleaned consistently and no iron chips or dust impurities shall be adhered to. Before each operation, the supporting blocks or rollers and the rotor journal shall be wiped off and a small amount of lubricating oil shall be added.
3. When moving the support frame, the rotor should be changed together or the left and right support frames should be moved at the same speed to avoid scratches and abrasion on the outer surface of the journal and roller, and it is not allowed to place the rotor on the roller frame for hitting or bumping.
4. In winter, due to the low temperature, the computer system occasionally starts slowly below zero to normal appearance, which does not affect the normal operation of the balancer.
The lens glass of the optoelectronic head of the automatic dynamic balancing machine should always be wiped clean by wiping the mirror paper or cloth to keep it clean. Never wipe the mirror surface with an oily or dirty gauze head. Fully automatic balancing machine is a precise testing equipment, which should be kept and operated by a special person. Then what should be done well in the process of using the balancer so as to make the service life of the balancer longer?
Fully automatic balancer maintenance knowledge reference:
1. Keep the surface of the supporting connection clean. Check the lumbar carefully before working, refuel and keep good lubrication during work.
2. The parts of the swing frame have been adjusted before leaving the factory. Do not disassemble them at will during use.
3.Add a suitable amount of oil No.30 to the lubrication area before use in each shift. Butter in each shift should be cleaned and changed once a year.
4. The locking mechanism should be able to lock the swing frame reliably. When loosening, it should leave the swing part completely. The swing frame should only be loosened when measuring and should be locked for the rest of the time. The wheel frame should not move when locking.
5.Balanced parts should not be placed on a shelf during off-hours.
6.Electric boxes should be kept clean to prevent moisture.
7.When the machine is found to be inoperable during use, it should cut off the power supply in time and inform the maintenance team.
To keep the fully automatic balancer clean from time to time, the guide rail surface should be kept clean and should be oiled and rust-proof from time to time. The surface of the support block or roller should be kept clean and no iron or dust debris should be adhered to. The support block or roller and rotor journal should be wiped off before each work and a little lubricant added. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed so as to avoid scratches and abrasions on the journal and the surface of the rollers. Never allow the rotor to be knocked or hit on the roller frame.
The automatic balancing machine is an instrument used to measure rotor imbalance, which is corrected according to the measured results so as to improve the mass distribution of the balanced rotor and reduce the vibration of the journal or the force acting on the bearing when the rotor is running to the specified range. For the daily maintenance of the car, the role of the balancer can not be ignored. How much do you know about the balancer?
1. It is necessary to wipe the balancing machine frequently and insist on cleaning the balancing machine. The guide rail surface should be cleaned consistently and always be oiled and rust-proof.
2. The exterior of the supporting blocks or rollers shall be cleaned consistently and no iron chips or dust impurities shall be adhered to. Before each operation, the supporting blocks or rollers and the rotor journal shall be wiped off and a small amount of lubricating oil shall be added.
3. When moving the support frame, the rotor should be changed together or the left and right support frames should be moved at the same speed to avoid scratches and abrasion on the outer surface of the journal and roller, and it is not allowed to place the rotor on the roller frame for hitting or bumping.
4. In winter, due to the low temperature, the computer system occasionally starts slowly below zero to normal appearance, which does not affect the normal operation of the balancer.
The lens glass of the optoelectronic head of the automatic dynamic balancing machine should always be wiped clean by wiping the mirror paper or cloth to keep it clean. Never wipe the mirror surface with an oily or dirty gauze head. Fully automatic balancing machine is a precise testing equipment, which should be kept and operated by a special person. Then what should be done well in the process of using the balancer so as to make the service life of the balancer longer?
Fully automatic balancer maintenance knowledge reference:
1. Keep the surface of the supporting connection clean. Check the lumbar carefully before working, refuel and keep good lubrication during work.
2. The parts of the swing frame have been adjusted before leaving the factory. Do not disassemble them at will during use.
3.Add a suitable amount of oil No.30 to the lubrication area before use in each shift. Butter in each shift should be cleaned and changed once a year.
4. The locking mechanism should be able to lock the swing frame reliably. When loosening, it should leave the swing part completely. The swing frame should only be loosened when measuring and should be locked for the rest of the time. The wheel frame should not move when locking.
5.Balanced parts should not be placed on a shelf during off-hours.
6.Electric boxes should be kept clean to prevent moisture.
7.When the machine is found to be inoperable during use, it should cut off the power supply in time and inform the maintenance team.
To keep the fully automatic balancer clean from time to time, the guide rail surface should be kept clean and should be oiled and rust-proof from time to time. The surface of the support block or roller should be kept clean and no iron or dust debris should be adhered to. The support block or roller and rotor journal should be wiped off before each work and a little lubricant added. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed so as to avoid scratches and abrasions on the journal and the surface of the rollers. Never allow the rotor to be knocked or hit on the roller frame.
191 Views
