details
Shanghai SHENMAN belt drive balancer is suitable for 16-6000kg rotor dynamic balance correction. Belt drive balancing machine, there is no universal coupling itself remaining unbalance and the unbalance error caused by the joint fixture, it really ensures the balance of the quality of the workpiece, improve the balance accuracy, and the ring belt drive convenient loading and unloading, thus improving the work efficiency.
SA-5(50kg) This is the company's own design and manufacture of hard bearing belt drive balancing machine. Products are widely used in small and medium-sized motor, fan, power tools, machinery manufacturing, woodworking machinery, belt pulley and other high-speed rotating body workpiece balance correction.
Measurement system adopts SMC microcomputer measurement system. Speed, value and phase are all digitally displayed. Unbalance is directly displayed by "G". Six types of rotor can be arbitrarily selected, directly with digital input of various parameters, after a start can correctly display the value of the unbalance of the workpiece (G) and phase, and can store data and display intuitive. The belt is adopted as the transmission mode, so it is easy to load and unload and fast to start.
The electromechanical transducer adopts piezoelectric sensor, which has the advantages of small volume, large output and high sensitivity.
| SA-5(50kg) Hard Bearing Belt Drive Balancing Machine Technical Parameters: | |
| 1. range of workpiece mass（kg） | 50 |
| 2. maximum diameter of work（mm） | 850 |
| 3. Axle diameter range at ring belt drive（mm） | 20-350 |
| 4. Distance between two supports（mm） | 150-1050 |
| 5. Range of bearing diameter（mm） | 8-140 |
| 6. balancing speed（r/min） | 480/720/960/1440 |
| 7. Motor Power（kw） | 0.75 |
| 8. The minimum residual unbalance can be achieved emar(g﹒mm/kg) | ≤0.5 |
| 9. unbalance reduction ratio URR(%) | ≥95 |
| 10. Power Supply | three-phase/380V ; 50HZ |
| 11. Equipped with independent vertical control cabinet | |
| 12. Electrical measuring box | microcomputer digital |
| 13. Bearing in roller carrier | NSK(Japan） |
